>>
SIEMENS MOTOR
Typ: 1LA7096-4AA10
380V, 1,5kW, 1420/min
SELF ASPIRATING AERATOR Self-Suction Aerator
Rotation: 1420/min
Air input:
7,5 lit./sec.
WATER
Alfred Zajic........ Obala.com..........NewDownrigger.com.........Pescatraina.com

POZOR:
Vsi posnetki so last zasebnega arhiva,prepovedano je kopiranje in javno predvajanje brez predhodnega soglasja.

ATTENZIONE:
E'vietata la riproduzione,anche parziale di questo sito senza autorizzasione.

ATTENTION:
All photos and videos on this sites are protected by Universal Copyright Convention and may not be reproduced.
Alfred Zajic, Koper, Slovenia, EU             20.Marec 2008
INFO@PONDAERATION.NET
PondAeration.net
Rotation: 1420/min
Rotation: 1420/min
PICTURE -1
PICTURE -2
VIDEO -1
VIDEO -2

VIDEO -3
VIDEO -4

TURBINE
IMAGE
TURBINE
DEPTH -1M.
TURBINE
DEPTH -2M.
TURBINE
DEPTH -3M.
PICTURE
VIDEO -1
VIDEO -2
VIDEO -3
DIAGRAM
PICTURE
VIDEO -1
REVOLUTIONARY DEEPWATER SELF ASPIRATING AERATOR
- AERATE UP THE 10M DEEP -

Toring.com   Wateroxygenation.com   Newaerator.com       Pondaeration.net     Torox.net
Toring Turbine
air out
NewDownrigger.com
The first video-shot of the submarine spring, recorded with an emersed camera
==============================================================================
==============================================================================
SELF SUCHING TURBINE       TORING.COM
Air input:
4,55 lit./sec.
Air input:
3,1 lit./sec.
Wastewater aeration
Aeration Turbines are designed to aerate and mix fluids industrially. They are foremost used in brewing, pond aeration and sewage treatment plants.
Aeration Turbines are designed for mixing gases, usually air, with a liquid, usually water. They can serve additional purposes like destratification, agitator or pump.
There are numerous design variations in use or newly entering the market. Most are centrifugal, where fluid enters at the axis and exits around the perimeter of the rotor. Aeration Turbines can run open or in a housing. Some designs have bladed rotors which leads to more splashing and those need to run close to the surface, which is an obvious sign of lesser efficiency.
Generally the performance efficincy of Aeration Turbines is very high, the space requirement is compact, both at high reliability and all those factors reduce operational cost.
The use of Aeration Turbines in industry is still underdeveloped especially with waste water treatment. With raising population and the growing strain on clean water supplies such environmentally friendly solutions are becoming more important.
The technology allows a more decentralized approach to waste water treatment as sewage can be oxigenised at pumping stations for bacteria to start breaking down the sewage before it even arrives at centralized processing plants.
Aeration Turbines are more and more entering industry because of their significantly higher efficincy and reduced size of used gear compared to other methods of aeration. This means less investment into process infrastructure and substantial savings to both the overall cost but formemost running cost for electricity. WIKIPEDIA
wastewater aeration